AB-3-120-105-HP
Active yaw brake
- Double high pressure seal, redundancy
- Applicable for several disc thicknesses
- Air gap brake pads according to customer specification
- Inspection holes for brake pad wear
- Grooved brake pads for redirecting fine dust & contamination
- Drain ports for oil leakage, preventing pads contamination
- Lifting eyes for good handling and fitting
- Brake pads with electric wear indicators
Active yaw brakes
Yaw brakes control the position of the nacelle, as it rotates with the changing wind direction to maximize power and efficiency. To avoid extreme loads on the yaw drives, pinions and gears, yaw brakes are mounted at the nacelle base frame, while a brake disc is mounted on the tower top.
During full operation of the turbine, the yaw brakes are pressurized to the maximum pressure. This will keep the nacelle in the correct wind direction, while decreasing the external loads on the yaw drives & pinions.
During a yaw movement, pressure inside the yaw brakes is decreased to 20-40% of the maximum braking force, to dampen external forces on the yaw drives & pinions, while the brake disc is sliding through the yaw brakes.
